#include <Rect.h>

Public Member Functions
	XII_DECLARE_POD_TYPE ()
	xiiRectTemplate ()
	Default constructor does not initialize the data.
	xiiRectTemplate (Type x, Type y, Type width, Type height)
	Constructor to set all values.
	xiiRectTemplate (Type width, Type height)
	Initializes x and y with zero, width and height with the given values.
	xiiRectTemplate (const xiiVec2Template< Type > &vTopLeftPosition, const xiiVec2Template< Type > &vSize)
	Initializes x and y from pos, width and height from vSize.
Type	Left () const
	The smaller value along x.
Type	Right () const
	The larger value along x.
Type	Top () const
	The smaller value along y.
Type	Bottom () const
	The larger value along y.
Type	GetX1 () const
	The smaller value along x. Same as Left().
Type	GetX2 () const
	The larger value along x. Same as Right().
Type	GetY1 () const
	The smaller value along y. Same as Top().
Type	GetY2 () const
	The larger value along y. Same as Bottom().
xiiVec2Template< Type >	GetMinCorner () const
	Returns the minimum corner position. Same as GetTopLeft().
xiiVec2Template< Type >	GetMaxCorner () const
	Returns the maximum corner position. Same as GetBottomRight().
xiiVec2Template< Type >	GetTopLeft () const
	Returns the top left corner. Same as GetMinCorner().
xiiVec2Template< Type >	GetTopRight () const
	Returns the top right corner.
xiiVec2Template< Type >	GetBottomLeft () const
	Returns the bottom left corner.
xiiVec2Template< Type >	GetBottomRight () const
	Returns the bottom right corner. Same as GetMaxCorner().
xiiVec2Template< Type >	GetCenter () const
	Returns the center point of the rectangle.
xiiVec2Template< Type >	GetExtents () const
	Returns the width and height as a vec2.
xiiVec2Template< Type >	GetHalfExtents () const
	Returns the half width and half height as a vec2.
void	Grow (Type xy)
	Increases the size of the rect in all directions.
bool	operator== (const xiiRectTemplate< Type > &rhs) const
bool	IsValid () const
	Checks whether the position and size contain valid values.
bool	HasNonZeroArea () const
	Returns true if the area of the rectangle is non zero.
bool	Contains (const xiiVec2Template< Type > &vPoint) const
	Returns true if the rectangle contains the provided point.
bool	Contains (const xiiRectTemplate< Type > &r) const
	Returns true if the rectangle contains the provided rectangle completely (no intersecting edges).
bool	Overlaps (const xiiRectTemplate< Type > &other) const
void	ExpandToInclude (const xiiRectTemplate< Type > &other)
	Extends this rectangle so that the provided rectangle is completely contained within it.
void	ExpandToInclude (const xiiVec2Template< Type > &other)
	Extends this rectangle so that the provided point is contained within it.
void	Clip (const xiiRectTemplate< Type > &clipRect)
	Clips this rect so that it is fully inside the provided rectangle.
const xiiVec2Template< Type >	GetClampedPoint (const xiiVec2Template< Type > &vPoint) const
const xiiRectTemplate< Type >	GetClampedRect (const xiiRectTemplate< Type > &r) const
void	SetCenter (Type tX, Type tY)
	Sets the center of the rectangle.
void	Translate (Type tX, Type tY)
	Moves the rectangle.
void	Scale (Type sX, Type sY)
	Scales width and height, and moves the position as well.

Static Public Member Functions
static xiiRectTemplate< Type >	MakeInvalid ()
static xiiRectTemplate< Type >	MakeZero ()
	Creates a rect that is located at the origin and has zero size. This is a 'valid' rect.
static xiiRectTemplate< Type >	MakeIntersection (const xiiRectTemplate< Type > &r0, const xiiRectTemplate< Type > &r1)
static xiiRectTemplate< Type >	MakeUnion (const xiiRectTemplate< Type > &r0, const xiiRectTemplate< Type > &r1)

Public Attributes
Type	x
Type	y
Type	width
Type	height

Detailed Description

template<typename Type>
class xiiRectTemplate< Type >

A simple rectangle class templated on the type for x, y and width, height.

Constructor & Destructor Documentation

◆ xiiRectTemplate()

template<typename Type>

XII_ALWAYS_INLINE xiiRectTemplate< Type >::xiiRectTemplate ( )

default

Default constructor does not initialize the data.

Member Function Documentation

◆ GetClampedPoint()

template<typename Type>

XII_ALWAYS_INLINE const xiiVec2Template< Type > xiiRectTemplate< Type >::GetClampedPoint ( const xiiVec2Template< Type > & vPoint ) const

nodiscard

The given point is clamped to the area of the rect, i.e. it will be either inside the rect or on its edge and it will have the closest possible distance to the original point.

Test: This is new

◆ GetClampedRect()

template<typename Type>

const xiiRectTemplate< Type > xiiRectTemplate< Type >::GetClampedRect ( const xiiRectTemplate< Type > & r ) const

inlinenodiscard

Clamps the given rect to the area of this rect and returns it.

If the input rect is entirely outside this rect, the result will be reduced to a point or a line closest to the input rect.

◆ IsValid()

template<typename Type>

XII_ALWAYS_INLINE bool xiiRectTemplate< Type >::IsValid ( ) const

nodiscard

Checks whether the position and size contain valid values.

Test: This is new

◆ MakeIntersection()

template<typename Type>

xiiRectTemplate< Type > xiiRectTemplate< Type >::MakeIntersection	(	const xiiRectTemplate< Type > &	r0,
		const xiiRectTemplate< Type > &	r1 )

staticnodiscard

Creates a rect that is the intersection of the two provided rects.

If the two rects don't overlap, the result will be a valid rect, but have zero area. See IsValid() and HasNonZeroArea().

Test: This is new

◆ MakeInvalid()

template<typename Type>

xiiRectTemplate< Type > xiiRectTemplate< Type >::MakeInvalid ( )

staticnodiscard

Creates an 'invalid' rect.

IsValid() will return false. It is possible to make an invalid rect valid using ExpandToInclude().

Test: This is new

◆ MakeUnion()

template<typename Type>

xiiRectTemplate< Type > xiiRectTemplate< Type >::MakeUnion	(	const xiiRectTemplate< Type > &	r0,
		const xiiRectTemplate< Type > &	r1 )

staticnodiscard

Creates a rect that is the union of the two provided rects.

This is the same as constructing a bounding box around the two rects.

Test: This is new

◆ Overlaps()

template<typename Type>

XII_ALWAYS_INLINE bool xiiRectTemplate< Type >::Overlaps ( const xiiRectTemplate< Type > & other ) const

nodiscard

Returns true if the rectangle overlaps the provided rectangle. Also returns true if the rectangles are contained within each other completely (no intersecting edges).

◆ Scale()

template<typename Type>

void xiiRectTemplate< Type >::Scale	(	Type	sX,
		Type	sY )

Scales width and height, and moves the position as well.

Test: This is new

◆ SetCenter()

template<typename Type>

void xiiRectTemplate< Type >::SetCenter	(	Type	tX,
		Type	tY )

Sets the center of the rectangle.

Test: This is new

◆ Translate()

template<typename Type>

void xiiRectTemplate< Type >::Translate	(	Type	tX,
		Type	tY )

Moves the rectangle.

Test: This is new

The documentation for this class was generated from the following files:

/home/runner/work/XII/XII/Source/Engine/Foundation/Math/Declarations.h
/home/runner/work/XII/XII/Source/Engine/Foundation/Math/Rect.h
/home/runner/work/XII/XII/Source/Engine/Foundation/Math/Implementation/Rect_inl.h

Public Member Functions

Static Public Member Functions

Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ xiiRectTemplate()

Member Function Documentation

◆ GetClampedPoint()

◆ GetClampedRect()

◆ IsValid()

◆ MakeIntersection()

◆ MakeInvalid()

◆ MakeUnion()

◆ Overlaps()

◆ Scale()

◆ SetCenter()

◆ Translate()