Describes a path shape. More...

#include <PathComponent.h>

Inheritance diagram for xiiPathComponent:

Classes
struct	ControlPoint
	The 'raw' data for a single path control point. More...

struct	LinearizedElement
	If the path is linearized, this represents a single sample point. More...

struct	LinearSampler
	An object that keeps track of where one is sampling the path component. More...

Public Member Functions
virtual void	SerializeComponent (xiiWorldWriter &ref_stream) const override
	Override this to save the current state of the component to the given stream.

virtual void	DeserializeComponent (xiiWorldReader &ref_stream) override
	Override this to load the current state of the component from the given stream.

void	OnMsgPathChanged (xiiMsgPathChanged &ref_msg)
	Informs the path component, that its shape has changed. Sent by path nodes when they are modified.

void	SetClosed (bool bClosed)
	Whether the path end connects to the beginning.

bool	GetClosed () const

void	SetPathFlags (xiiBitflags< xiiPathComponentFlags > flags)

xiiBitflags< xiiPathComponentFlags >	GetPathFlags () const

void	EnsureControlPointRepresentationIsUpToDate ()
	If the control points changed recently, this makes sure the local representation is synchronized. Call this before GetControlPointRepresentation(), if necessary.

const xiiArrayPtr< const xiiPathComponent::ControlPoint >	GetControlPointRepresentation () const
	Grants access to the control points that define the path's shape.

void	EnsureLinearizedRepresentationIsUpToDate ()
	If the control points changed recently, this makes sure the linearized representation gets recreated. Call this before GetLinearizedRepresentation(), if necessary.

const xiiArrayPtr< const xiiPathComponent::LinearizedElement >	GetLinearizedRepresentation () const
	Grants access to the linearized representation that define the path's shape.

float	GetLinearizedRepresentationLength () const
	Returns the total length of the linearized path representation.

void	SetDisableControlPointUpdates (bool bDisable)
	Forces that the current control point state is never updated in the future. Used as a work-around during serialization.

void	SetLinearSamplerTo (LinearSampler &ref_sampler, float fDistance) const
	Sets the sampler to the desired distance along the path.

bool	AdvanceLinearSamplerBy (LinearSampler &ref_sampler, float &inout_fAddDistance) const
	Moves the sampler along the path by the desired distance.

xiiPathComponent::LinearizedElement	SampleLinearizedRepresentation (const LinearSampler &sampler) const
	Samples the linearized path representation at the desired location and returns the interpolated values.

void	SetLinearizationError (float fError)
	Specifies how large the error of the linearized path representation is allowed to be.

float	GetLinearizationError () const

Public Member Functions inherited from xiiComponent
void	SetActiveFlag (bool bEnabled)
	Sets the active flag of the component, which affects its active state.

bool	GetActiveFlag () const
	Checks whether the 'active flag' is set on this component. Note that this does not mean that the component is also 'active'.

bool	IsActive () const
	Checks whether this component is in an active state.

bool	IsActiveAndInitialized () const
	Returns whether this component is active and initialized.

bool	IsActiveAndSimulating () const
	Whether the component is currently active and simulation has been started as well.

xiiComponentManagerBase *	GetOwningManager ()
	Returns the corresponding manager for this component.

const xiiComponentManagerBase *	GetOwningManager () const
	Returns the corresponding manager for this component.

xiiGameObject *	GetOwner ()
	Returns the owner game object if the component is attached to one or nullptr.

const xiiGameObject *	GetOwner () const
	Returns the owner game object if the component is attached to one or nullptr.

xiiWorld *	GetWorld ()
	Returns the corresponding world for this component.

const xiiWorld *	GetWorld () const
	Returns the corresponding world for this component.

xiiComponentHandle	GetHandle () const
	Returns a handle to this component.

xiiUInt32	GetUniqueID () const
	Returns the unique id for this component.

void	SetUniqueID (xiiUInt32 uiUniqueID)
	Sets the unique id for this component.

void	EnsureInitialized ()
	Ensures that the component is initialized. Must only be called from another component's Initialize callback.

void	EnsureSimulationStarted ()
	Ensures that the OnSimulationStarted method has been called. Must only be called from another component's OnSimulationStarted callback.

XII_ALWAYS_INLINE bool	SendMessage (xiiMessage &ref_msg)
	Sends a message to this component.

XII_ALWAYS_INLINE bool	SendMessage (xiiMessage &ref_msg) const

void	PostMessage (const xiiMessage &msg, xiiTime delay=xiiTime::MakeZero(), xiiObjectMsgQueueType::Enum queueType=xiiObjectMsgQueueType::NextFrame) const
	Queues the message for the given phase. The message is processed after the given delay in the corresponding phase.

virtual bool	HandlesMessage (const xiiMessage &msg) const
	Returns whether the given Message is handled by this component.

void	SetUserFlag (xiiUInt8 uiFlagIndex, bool bSet)
	Be careful to check which flags may already be in use by base classes.

bool	GetUserFlag (xiiUInt8 uiFlagIndex) const
	Retrieves a custom flag. Index must be between 0 and 7.

void	SetCreatedByPrefab ()
	Adds xiiObjectFlags::CreatedByPrefab to the component. See the flag for details.

bool	WasCreatedByPrefab () const
	Checks whether the xiiObjectFlags::CreatedByPrefab flag is set on this component.

Public Member Functions inherited from xiiReflectedClass
virtual const xiiRTTI *	GetDynamicRTTI () const

bool	IsInstanceOf (const xiiRTTI *pType) const
	Returns whether the type of this instance is of the given type or derived from it.

template<typename T>
XII_ALWAYS_INLINE bool	IsInstanceOf () const
	Returns whether the type of this instance is of the given type or derived from it.

Protected Member Functions
virtual void	OnActivated () override
	This method is called when the component gets activated.

virtual void	OnDeactivated () override
	This method is called when the component gets deactivated.

xiiUInt32	Nodes_GetCount () const

const xiiString &	Nodes_GetNode (xiiUInt32 i) const

void	Nodes_SetNode (xiiUInt32 i, const xiiString &node)

void	Nodes_Insert (xiiUInt32 uiIndex, const xiiString &node)

void	Nodes_Remove (xiiUInt32 uiIndex)

void	FindControlPoints (xiiDynamicArray< ControlPoint > &out_ControlPoints) const

void	CreateLinearizedPathRepresentation (const xiiDynamicArray< ControlPoint > &points)

void	DrawDebugVisualizations ()

Protected Member Functions inherited from xiiComponent
	xiiComponent ()
	Keep the constructor private or protected in derived classes, so it cannot be called manually.

bool	IsDynamic () const
	Returns whether this component is dynamic and thus can only be attached to dynamic game objects.

virtual xiiWorldModuleTypeId	GetTypeId () const =0

virtual xiiComponentMode::Enum	GetMode () const =0

virtual void	Initialize ()
	Can be overridden for basic initialization that depends on a valid hierarchy and position.

virtual void	Deinitialize ()
	This method is called before the component is destroyed. A derived type can override this method to do common de-initialization work.

virtual void	OnSimulationStarted ()
	This method is called once for active components, at the start of the next world update, but only when the world is simulated.

void	EnableUnhandledMessageHandler (bool enable)
	By default disabled. Enable to have OnUnhandledMessage() called for every unhandled message.

virtual bool	OnUnhandledMessage (xiiMessage &msg, bool bWasPostedMsg)
	When EnableUnhandledMessageHandler() was activated, this is called for all messages for which there is no dedicated message handler.

virtual bool	OnUnhandledMessage (xiiMessage &msg, bool bWasPostedMsg) const
	When EnableUnhandledMessageHandler() was activated, this is called for all messages for which there is no dedicated message handler.

bool	IsInitialized () const

bool	IsInitializing () const

bool	IsSimulationStarted () const

Protected Attributes
xiiBitflags< xiiPathComponentFlags >	m_PathFlags

float	m_fLinearizationError = 0.05f

float	m_fLinearizedLength = 0.0f

bool	m_bDisableControlPointUpdates = false

bool	m_bControlPointsChanged = true

bool	m_bLinearizedRepresentationChanged = true

bool	m_bClosed = false

xiiDynamicArray< xiiString >	m_Nodes

xiiDynamicArray< LinearizedElement >	m_LinearizedRepresentation

xiiDynamicArray< ControlPoint >	m_ControlPointRepresentation

Protected Attributes inherited from xiiComponent
const xiiRTTI *	m_pMessageDispatchType = nullptr
	Messages will be dispatched to this type. Default is what GetDynamicRTTI() returns, can be redirected if necessary.

Additional Inherited Members
Static Public Member Functions inherited from xiiNoBase
static const xiiRTTI *	GetStaticRTTI ()

Detailed Description

Describes a path shape.

This can be used for moving things along the path (see xiiFollowPathComponent) or to describe the (complex) shape of an object, for example a rope.

The xiiPathComponent stores the shape as nodes with positions and tangents. It can be asked to provide a 'linearized' representation, e.g. one that is made up of many short segments whose linear interpolation is still reasonably close to the curved shape.

To set up the shape, attach child objects and attach a xiiPathNodeComponent to each. Also give each child object a distinct name. Then reference these child objects by name through the "Nodes" property on the path shape.

During scene export, typically the child objects are automatically deleted (if they have no children and no other components). Instead, the xiiPathComponent stores all necessary information in a more compact representation.

Member Function Documentation

◆ AdvanceLinearSamplerBy()

bool xiiPathComponent::AdvanceLinearSamplerBy	(	LinearSampler &	ref_sampler,
		float &	inout_fAddDistance ) const

Moves the sampler along the path by the desired distance.

Prefer this over SetLinearSamplerTo().

◆ DeserializeComponent()

void xiiPathComponent::DeserializeComponent ( xiiWorldReader & ref_stream )

overridevirtual

Override this to load the current state of the component from the given stream.

The active state will be automatically serialized. The 'initialized' state is not serialized, all components will be initialized after creation, even if they were already in an initialized state when they were serialized.

Reimplemented from xiiComponent.

◆ OnActivated()

void xiiPathComponent::OnActivated ( )

overrideprotectedvirtual

This method is called when the component gets activated.

By default a component is active, but it can be created in an inactive state. In such a case OnActivated() is only called once a component is activated. If a component gets switched between active and inactive at runtime, OnActivated() and OnDeactivated() are called accordingly. In contrast Initialize() and Deinitialize() are only ever called once.

See also: OnActivated(), OnDeactivated(), Initialize(), Deinitialize(), OnSimulationStarted()

Reimplemented from xiiComponent.

◆ OnDeactivated()

void xiiPathComponent::OnDeactivated ( )

overrideprotectedvirtual

This method is called when the component gets deactivated.

Upon destruction, a component that is active first gets deactivated. Therefore OnDeactivated() should be used for typical game code cleanup.

See also: OnActivated(), OnDeactivated(), Initialize(), Deinitialize(), OnSimulationStarted()

Reimplemented from xiiComponent.

◆ SerializeComponent()

void xiiPathComponent::SerializeComponent ( xiiWorldWriter & ref_stream ) const

overridevirtual

Override this to save the current state of the component to the given stream.

Reimplemented from xiiComponent.

◆ SetLinearizationError()

void xiiPathComponent::SetLinearizationError ( float fError )

Specifies how large the error of the linearized path representation is allowed to be.

The lower the allowed error, the more detailed the linearized path will be, to match the Bezier representation as closely as possible.

The error is a distance measure. Thus a value of 0.01 means that the linearized representation may at most deviate a centimeter from the real curve.

◆ SetLinearSamplerTo()

void xiiPathComponent::SetLinearSamplerTo	(	LinearSampler &	ref_sampler,
		float	fDistance ) const

Sets the sampler to the desired distance along the path.

For a long distance, this is a slow operation, because it has to follow the path from the beginning.

The documentation for this class was generated from the following files:

/home/runner/work/XII/XII/Source/Engine/GameEngine/Animation/PathComponent.h
/home/runner/work/XII/XII/Source/Engine/GameEngine/Animation/Implementation/PathComponent.cpp

Classes

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ AdvanceLinearSamplerBy()

◆ DeserializeComponent()

◆ OnActivated()

◆ OnDeactivated()

◆ SerializeComponent()

◆ SetLinearizationError()

◆ SetLinearSamplerTo()